In our industrial production is often used welding fixture, which is used to fix the mechanical manufacturing process of the object so that it occupies the correct position to accept the construction or detection devices, car is no exception, as the need for welding jig. But as the automobile welding jig guarantee weldment size, improve assembly precision and efficiency, used to prevent welding deformation jig, with traditional fixtures incomparable advantages. Then the car is equipped with a welding jig ask for?
1, strut baffle, spiral clamping assembly of the device, mounted on the screw, to do with the pin hole by a guarantee from the baffle and the pin screw clamp devices right side and stop pin base surface.
2, the engine liner two latch mechanism, the assembly Kuaiche screw clamping device, mounted on the screw, to do with the pin hole by the pin latch mechanism and ensure Kuaiche screw clamping device to the right of the center line and stop pin base surface distance and tolerances.
3, the stopper pin fitted to the clamp, the need to ensure that the base surface and the clamp vertical transverse centerline.
4, fitted with springs, clips and other parts to complete the assembly.
5, screw nut and the clamping mechanism assembly speaker bearing assembly, fitted with screw stud base, to do with the pin hole by pin screw clamping mechanism to ensure that the distance positioning cone pin centerline stop pin and the base surface tolerance.
6, strut baffle, spiral clamping device fitted to the clamp on the need to ensure that the base surface with a specific folder transverse centerline parallel; positioning and clamping sequence 4 engine liner latch mechanism two-piece, Kuaiche spiral clamping device fitted to a specific folder, you need to ensure that its centerline and transverse centerline perpendicular to the clamp.
For automotive assembly welding jig What are the requirements to be here today to share, through the introduction we can know, when using the product according to the product structure features, production conditions and you actually need to design and manufacture.
